WiFi Smart Bulb RGB Instruction Manual
Download the App from the Apple App store or from Google Play store. Search for “TCP Smart”.
- Open the App.
- Login with your account and password. For the first time user, you have to register a new account with your email address.
- Press ADD DEVICE and select LIGHTING DEVICES to set up a new device.
- Fit your Tape Light, once connected to the power it will flash quickly. If it does not flash quickly;
For Tape Lights with the below driver hold down the power button for 5 seconds. Your light should start to flash quickly.
For Tape Lights with the below driver turn the Tape Light on/off 3 times and back on again. Your light should start to flash quickly.
- Press CONFIRM on your App screen.
- Connect to your WiFi network and enter its password. Then press NEXT on your App screen.
- Connection cycle will Appear. Text located on the bottom of the screen will begin to be highlighted green. Once all 3 points are highlighted in green, the cycle will complete 100%.
- You are now ready to control and set mood lighting from anywhere. Enjoy!
- Your WiFi smart Tape Light is connected to the internet through your WiFi, using a wireless network.
- You can control your Tape Light and see the on/off state from anywhere with an internet connection through your smart mobile phone App.
- Using the App you can change the brightness or colour of your Tape Light, as well as setting schedules or starting a timer to turn your bulb on or off.
- Enjoy the benefits of security, energy efficiencies, cost savings, convenience, comfort and peace of mind. TCP makes home automation easy!
- Control from any destination.
- Set automatic timers, create the right atmosphere.
- LED Tape Light 3m
- WiFi Smart LED bulb User Manual
- Connection cables (foldable for corners)
- Power supply 24w
- Control through the App from anywhere and anytime.
- Share device control to others.
- 1 App can support a number of smart lights at the same time.
- Easy to install and use.
- Dim the lights
- Create moods with a variety of different colours and settings
- Works with Amazon Alexa and Google Home-search for our “Skill” and “Action”!
- (W) 35 x (H) 235 x (D) 19 mm
- Input / Output: DC12-24V, 24W power supply
- Line sequence: GRB, 4pin plug
- WiFi 2.4gHz
LED Tape Light
- (W) 10 mm x (L) 3 metres
- LED type: 5050SMD, 30LEDs/strip, 90LEDs/set
- Beam angle: 120 degree
- IP20 (non waterproof)
- RGB colour changeable via TCP Smart App (16 million colours)
- Works with Amazon Alexa & Google Home
- Works with iOS & Android